Advanced Ventilation Controller

The Advanced Ventilation Controller (TC-AVC) from Cool Components is a programmable thermostat that can be used to control either high voltage or low voltage fans. The controller can be directly hardwired to thermostatically control most high voltage fans such as the Cool Components VS-IDF Inline Duct Fan and the Cool Components VS-RSC Remote System Cooler. Additionally, it can be used to control low voltage fans by hardwiring it directly into an electrical outlet. This unit will enable the user to choose/program the appropriate set points for any application. The controller is wall mountable (rack mount version is coming soon), fully programmable and has a backlit LCD display to show ambient temperature and make programming simple. In addition to a built-in temperature sensor, an optional 20 foot remote sensor is available for added versatility. This may be used when sensing and controlling the temperature in a projector enclosure, rack or other remote location. The controller features 5 relays that offer a large amount of flexibility and customization within your system. Two relays are programmable with one intended for fan operations and the other for alarm (all output high voltage only - do not connect low voltage products to the unit itself). The three fan relays trigger in relation to the user defined temperature set point with relay #1 triggered at the set point, #2 triggered at approximately 6 degrees higher, and #3 triggered at approximately 15 degrees higher than the main set point. For example, if you have an existing rack with high-voltage fans, you could attach primary fans to relay #1 and then secondary fans to relay #2. Venting fans could then be connected to relay #3. Ultimately the two alarm relays, 4 and 5, could be used to sound an audible alarm or power emergency fans to protect against a catastrophic failure if installed, for instance, in a rack full of server and switching equipment.

Please Note: This is a high voltage product. Be sure to contract a licensed electrician to ensure a safe and proper installation according to local codes.