Features
Specifications
Fan Specs
Dimensions: L 31.3 x W 22.7 x H 18.7cmConstruction: Polypropylene HousingFan Motor: Variable Speed MotorDuct Size: 6"Air Flow: 380 CFMRPM: 3000 MaxNoise: 32db Max* Power Specifications Power Connection: Pre-wired 120 Volt Power CordVoltage: 100-240V ACCurrent - Amp: .47A Max .94Control: PWM/0-10V DC
* Noise ratings for these fans can be deceiving due to the fact that they are mounted 'remotely', this means it will not be installed in an area where noise from the fan really matters. What will matter more is that the fan is mounted properly so there's no noise from vibration and that ducting and a proper vent is used as those factors would create noise before one would typically hear the noise from the fan itself. Also testing procedures vary so this is also a very unreliable measure when comparing fans.
The intended use of this package is for aggressively venting of rooms and closets. Typically such systems are roughed-in during construction (new or remodeling) but this could be retrofit if have easy attic access. The ceiling grill assembly (think HVAC return style assembly) mounts in the ceiling. The duct plate mounts into that assembly and has a 6" duct port as part of the plate. 6" ducting is then used to connect to the Inline Duct Fan. Optimally the fan is then exhausted to the HVAC return vent or back into the home. It should also be noted that for venting back into the home can run to a vent that looks similar to other AC vents and the idea is the air will mix with the air in the home, thus why you vent to a larger room or hallway, and then be recycled through the HVAC system. If you choose to not exhaust this way, do be conscious of the extreme amount of air will be pulling out of the home only to be replaced by outside or attic air (very undesirable). For this reason, if are in a very mild climate then it's not so bad but if it's a hot humid climate the HVAC system could be stressed. Now if still proceed to vent to the attic or crawlspace, ensure to still connect 3-4' of ducting to the exhaust port and position like an S. This is to create pressure within the fan as the fan units are intended to run with at least some pressure.
This Unit has a 2 Year Warranty