A mid to more aggressive spot cooler for eliminating heat pockets around components
This unit circulates air away from components protecting equipment from heat accumulations and failures. The unit is simply placed on top of a component and is ideal for cooling most any component, especially components that may not have proper spacing above and around them. The Spot Cooler is ideal when heat is a concern but does not reach extreme temperatures (for more aggressive cooling, use the HiFlo Unit and consider system ventilation products). The heavy gauge steel construction and powder coated finish provides a nice appearance and is extremely durable, it also features a more advanced magnetic bearing fan while all competing products use old ball bearings which simply get louder and louder over time. The product also features custom silicone isolation fan mounts and feet which eliminates noise caused by normal vibrations. The unit operates on DC voltage and by adjusting the voltage can be run silent or more aggressively depending on the application.
Like most of our products, this unit is considered a LIFETIME product. With basic maintenance (blow it off every 6 months to a year) and with easily replacing the fan every 7 to 10 years, you'll essentially have the product for a lifetime which helps reduce waste and having to redesign your cooling system...
This unit is also available with a Harsh Environment Fan (IP68 rated) and for more aggressive cooling when noise is not an issue, the unit can be fitted with a High Velocity fan.
Dimensions: W - 4 x D - 4 x H - 1 1/4 (10cm x 10 x 3.18)
Construction: Heavy Gauge Steel (Powder Coated Semi Gloss Black)
Cooling System: 1 Brushless 92mm Magnetic Bearing Fan (Est. 70,000 hrs.)
Air Flow: 39 CFM
Noise: Silent to ~28 dba (Max)
Multiple Units Can Be Powered with a Single PS-300 Power Supply
Connection: 2-Pin FastWire Power System (Ensure proper polarity)
Voltage: 5 to 9V DC for Normal Operation or 9 to 13V for More Aggressive Cooling
Current: 75mA at 12V